160ML Crystal Clear Epoxy Resin UV Curable Transparent Kit UV Lamp

160ML Crystal Clear Epoxy Resin UV Curable Transparent Kit UV Lamp

Price: [price_with_discount]
(as of [price_update_date] – Details)


Compact Portable UV Lamp for Jewellery Making Resin Art Resin Crafts DIY, Fast Drying Non-Toxic (1x 100ML + 2X 30ML)

The package includes:

  • 1x UV-curable epoxy resin (100ML)
  • 2x UV-curable epoxy resin (30ML)
  • 1x Mini UV lamp with USB cable, press the button once for setting 45 seconds or twice for setting 1 minute.

Package includes 2 small bottles of uv resin so you can just refill your small bottle when the big ones runs out instead of constantly buying small bottles!


More convenient: It can be used immediately, no need to do the proportion and mix.


it solidifies within 5-30 minutes (depending on the quantity) with the UV lamp (they serve as manicures). The resins of two components, on the contrary, usually need 24-48 hours to stay solid.

More stable:

Crystal clear quality, high transparency, excellent resistance to scratch, stain & yellowing.

How to use:

1. First we need a jewellery mold and our resin, you can add other accessories such as beads or glitter if you want.

2. Squeeze the bottle gently to let out the resin and deposit the amount that we need in the mould. If you want to mix beads / glitter, you can first mix them with the resin before putting it into the mold (only when the beads / glitter are very small), or use the tweezers to place them right after you have added the resin into the mold.

3. Dry the resin with the UV lamp for 2-4 minutes (if we are doing small pieces like rings).

4. Take out the result from the mold.

How to avoid bubbles:
1. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion.
2. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter.

EASY & CONVENIENT – UV resin ready to use, can instantly cure hard in minutes with UV lamp or UV torch. Do not need to measure, mix the ratio or take long curing time like AB resin.

SOME ADVICE – We recommend you to cure the resin by thin layers, which will take only 1-2 minutes. You may find it sticky on top of the fully cured resin, if this happens spray some alcohol in it and wipe it off the sticky disappears (or use an alcohol swab).

SAFE – Our hard type resin is made from high-quality, non-toxic and environmentally-friendly materials. Solvent-free and with no volatiles, UV resin is definitely the safest choice in the market. There is an odor before curing, it is harmless and will completely disappear after curing.

MULTIPURPOSE – The clear UV glue can be used for jewellery making, crafts decorations, casting and coating, cast figurines and make resin paintings etc. It can also be mixed with mica powder, colorants, glitter to get colorful finishes.



Leave a Reply